>> Hi All
>> I need someone to swap out a couple of 509as
>> Applicant should be in the proximity of Sevenoaks, Kent
>> regards
>> Wally Barnacle
>
>
>Mmmm, after the fourth posting of the same message in just over 1 hour,
>sounds like you're really desperate just to swap a couple of chips?  Ok,
Ill
>do them for =A350.00 each.  Of course you could try doing this yourself,=
 it
is
>quite easy.
>
>The best and easiest way if you don't know about electronics is to cut t=
he
>legs close to the chip with a thin sharp knife if the part is surface
mount
>or with a pair of cutters if the part is through hole.  Then just lift o=
ut
>the legs with a soldering iron and desolder the pads / holes afterwards.
>
>Then just solder the new part in.
>
>Brian.

Maybe desperate, maybe just new to the list, considering all the tags are
slightly different.

Maybe he doesn't know about electronics, maybe he's just a long ways
away...

I'll do it for free. Just cover my travel expenses (I live in Michigan,
USA) ;-)

-Denny

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.