On 30 November 2003 19:43 Wally Barnacle wrote:


> Hi All
> I need someone to swap out a couple of 509as
> Applicant should be in the proximity of Sevenoaks, Kent
> regards
> Wally Barnacle


Mmmm, after the fourth posting of the same message in just over 1 hour,
sounds like you're really desperate just to swap a couple of chips?  Ok, =
Ill
do them for =A350.00 each.  Of course you could try doing this yourself, =
it is
quite easy.

The best and easiest way if you don't know about electronics is to cut th=
e
legs close to the chip with a thin sharp knife if the part is surface mou=
nt
or with a pair of cutters if the part is through hole.  Then just lift ou=
t
the legs with a soldering iron and desolder the pads / holes afterwards.

Then just solder the new part in.

Brian.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.