Philip Pemberton wrote:

> The pin assignments are:
>  RB0      Power switch, active low
>  RA0      LCD "E"
>  RB1      LCD "RS"
>  RB2      LCD D4
>  RB3      LCD D5
>  RB4      LCD D6
>  RB5      LCD D7
>  RB6      TMR1 osc xtal (32kHz)
>  RB7      TMR1 osc xtal (32kHz)


RB4/D6 is also connected to the Wisp, right ?

Are you sure that the LCD isn't trying to "drive" it's
"D6" pin ? It can be both input and output, doesn't it ?
Isn't there also a R/W pin at the LCD ? How is that
connected ?

It might not be a problem with the PIC as such,
it might be that the LCD is driving the D6 line
and confusing the Wisp...

Jan-Erik.

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics