> Are EIDE drives ACTUALLY master/slave anymore?  I've noticed that
> things work just fine if I plug only a drive configured as "slave" in
> my secondary IDE controller, for instance...  Perhaps the functionality
> changed long before
> the request for terminology changes.

        The functionality is still there, however most controllers these days will
enumerate any device on the bus, therefore having a slave but no master is
an excepted situation. TTYL

----------------------------------
Herbert's PIC Stuff:
http://repatch.dyndns.org:8383/pic_stuff/

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body