Thanks for the responses but I'm getting most of my parts from Digikey and as far as I can tell, they don't have an appropriate holder, and on keyleco.com, in the fine print it says that CR2477 fits only in the model (1025-7) that holds only one cell. I can't believe this is such an unusual part. Nick ----- Original Message ----- From: "Spehro Pefhany" To: Sent: Wednesday, November 26, 2003 10:01 AM Subject: Re: [PICLIST] [PIC]: Coin Cell Holder > At 10:00 AM 11/25/2003 -0600, you wrote: > >Thanks for the response but these holders can only hold two smaller cells. > >I am looking to get 500+mAh @ 6V, which would require a pair or CR3032 or > >CR2477 or the like (they are thicker cells, hence the problem). > > http://www.keyelco.com/kec/pdfs/p06.pdf > > Part number 1025 looks like your man for 2xCR2477. > > Best regards, > > Spehro Pefhany --"it's the network..." "The Journey is the reward" > speff@interlog.com Info for manufacturers: http://www.trexon.com > Embedded software/hardware/analog Info for designers: http://www.speff.com > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body