Tim Hart said:
> Well....I read over most of that document....very good.
>
> Still confused about those "Single Shot" things....would a TX/RX on say
> the Serial port show up if setup to trigger?  Or would the next wave of
> nothing overwrite it?
>
> I guess what I'm asking is can an Analog O'Scope be setup to keep
> displaying a screen once a trigger is set on a channel?

No. But it persists on the screen for a short period of time. A very short
period of time if the write speed is high. Turn the intensity up and the
lights down low.

But typically you have control of the device under test, and you can set
it up do a continuously recurring event.

Analog scopes were all we had for many years. Digital scopes give you a
couple more features, but for the most part you can live without them.

Don't buy a worthless digital toy! When comparing them, a 100 MSps digital
scope has about the same usefulness as a 5 MHz analog scope.

Remember this is not the last scope you will ever buy!

Cheers,

Bob

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics