Is there room (need) for yet another PIC proto board? I'm considering
designing and marketing a couple of PIC prototype boards. I am looking
for input on features such as processors supported, desired peripherals
(LCD, switches, LEDs, relays, digital pots, frequency synthesizers,
audio amplifiers, keypads, etc.), size, cost, quality. Would folks like
to see board with high-end PICMicro in SMT pre-soldered to board. Also
considering supplying quick-turn "custom" proto boards if there is
adequate demand for a particular configuration of above features. Any
input would be greatly appreciated. Why am I doing this? After almost 25
years of working for other companies, I have finally jumped ship to work
for myself. Translate this into moving to Spokane, WA USA for another
start-up only to see it reduce staff by almost 50% in the past several
months. So here we are in Spokane and here we want to stay. Thank you
much for any input.

Best regards,

Tom Deutschman
www.wizbangdesigns.com <http://www.wizbangdesigns.com/>


--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics