> Double sided is OK with care.

If you are looking for thru-hole plating, check out the
http://www.lpkf.com website. The EasyContac
(http://www.lpkf.com/others/1/233-rp_chapter_easycontac.pdf) is a manual
thru-hole plating process in which you basically flare open the ends of
a copper barrel after instering it thru the hole. That kit unlike the
rest of their products wasn't overly expensive either.=20

For free time browsing, the LPKF site is definitely one to visit. They
make a lot of neat prototyping stuff though most of it is very
expensive.

Shahid

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics