I have recently purchased the Demo Board for the PIC18F8720 and am
looking to write a program which reads the input from a 10bit A2D
Converter through the I2C bus at 400kbs.

And to make this request even harder, I am looking for a really simple
example on how to do this and I am using the Hi-Tech PICC18 compiler, so
an example in C is preferable.

Does anybody know of any good places to start?  I have read through the
I2C specifications from Philips and believe I am ready to tackle this
beast.

Thanks guys

David



***************************************************************************=
******
The information contained in this e-mail message and any accompanying files=
 is or may be confidential.  If you are not the intended recipient, any use=
, dissemination, reliance, forwarding, printing or copying of this e-mail o=
r any attached files is unauthorised. This e-mail is subject to copyright. =
No part of it should be reproduced, adapted or communicated without the wri=
tten consent of the copyright owner. If you have received this e-mail in er=
ror, please advise the sender immediately by return e-mail, or telephone an=
d delete all copies. Fairfax does not guarantee the accuracy or completenes=
s of any information contained in this e-mail or attached files. Internet c=
ommunications are not secure, therefore Fairfax does not accept legal respo=
nsibility for the contents of this message or attached files.
***************************************************************************=
******

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu