If you don't already have someone to do the PCB design, count me in for that. I use Ivex WinBoard and WinDraft. TomD Tom at wizbangdesigns dot com -----Original Message----- From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Charles Craft Sent: Sunday, November 16, 2003 10:23 AM To: PICLIST@MITVMA.MIT.EDU Subject: Re: [PIC]: PIC Based Logic Analyzer I didn't say it was a perfect plan. :-) Get rev 1 out in the hands of a few people - early adopters. -----Original Message----- From: "Jan-Erik Soderholm XA (TN/PAC)" Sent: Nov 16, 2003 12:11 PM To: PICLIST@MITVMA.MIT.EDU Subject: Re: [PIC]: PIC Based Logic Analyzer Charles Craft wrote: > "As ugly as it is" do the board for the current design and parts... Just a observation, the selected SRAM (Dallas DS1258Y) is about $40.00 at Digikey. Min Qty = 9 and it's "Non-stock". A "normal" 256k*16 SRAM is about $8.00-9.00 and "In stock". Now, everyone *could* of course use the sample service at Dallas... Jan-Erik. -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body