On Wednesday, Nov 12, 2003, at 05:37 US/Pacific, Hulatt, Jon wrote:
>
>
> Anyway, for the most part my results are good. But I've not come up
> with a
> method for getting a component layout print onto the board. I think
> this is
> called the silkscreen, but correct me if I'm wrong (the typically white
> print that marks where the components go). Has anyone ever tackled
> this in a
> DIY scenario? I'd be interested to hear any ideas.
>
If you'll settle for black "silkscreen", I had somewhat promising
results using the "toner transfer" methods that some people use for
etchant resist.  since the silkscreen requirements are less exacting
than the tracks themselves, you don't even need to be as careful or
have as good a printer...

BillW

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu