Paul wrote:
> Having written some simple code in assembler and build it into hex
> within MPLAB v6.30 (build successful) I keep failing to burn it into a
> PIC.

What programmer do you use ?

> Having repeatedly got the error message below
> I have manually set the
> config bits to the correct settings and still get the same error
> message.... This is my first experience with MPLAB v6 as I have used an
> older v5 version before.
>
> The burner...

What "burner" ?

> has successfully worked with imported hex files so I know the
> burned itself works WITH this version of MPLAB and the 16f628..

Any suggestions??


Is the output below an "error message" ?
If so, what are the "errors" ?
Ah, wait, I think I understand, the "expected/received"
are column headers, right ?

> Configuration Bits Errors
>
> Configuration Setting...Expected....Received
>
> Oscillator......... INTRC I/O ....LP
> Code Protect...... Off ........All
> Master Clear Enable...Enabled......Disabled
> Data EE Read Protect ..Disabled ....Enabled

Now, if this is just a short test program, you could
just as well post the code...

Regards
Jan-Erik.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu