-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

source= http://www.piclist.com/piclist/2003/11/11/182119a.txt?

harshit suri asks:

Hello

Could someone please advise as to how i can force
eagle PCB CAD software to route only in one layer. Top
or bottom. I wish to make a PCB with a single side
only. But whenever i try to use the autorouter the
Software uses top and bottom layer to route. It does
so for simple circuits too

Thankyou


- --------

in the board window, execute the "change layer trestrict"
command so that the next items you draw will be in the top restrict layer.

then use the draw --> rectangle menu to initiate drawing a rectangle.

Draw the rectangle larger than the dimensions of the board.

You may also find it useful to execute the "add 0R@jumper" command in the
schematic for boards that are difficult to autoroute.  The solpad library
may also be useful.



- ---
Aubrey  McIntosh
http://www.piclist.com/member/AM-vima-Y84
PIC/PICList FAQ: http://www.piclist.com


-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com>

iQA/AwUBP7IbBAKlSw8yssF7EQKYFgCfahMl6rCwC7Qgfdq6qaGs4rFGa5cAn3P8
NDgtVDXqh/S53GIysJ9yJk6C
=7pBO
-----END PGP SIGNATURE-----

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu