I consider your problem is you probably still have a debug option set. It's
not allowed if you want to run your program alone.

Regards

Igor

-----Original Message-----
From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On
Behalf Of Angus Thomson
Sent: Saturday, November 08, 2003 1:15 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: [PIC]: Running code without an ICD?!


Hello

I am a new list member, so bear with me! I am trying to run code written
in CCS's C compiler on a 16F876, using an ICD 1 and MPLAB. The code
works fine when running in debug mode with the ICD connected (i.e. with
the 'icd = true' and 'debug' options set) but when I try and run the
code 'standalone' it does not work at all. As I know the code works, is
there a reason why the PIC would not be running my code without the ICD
connected? The MCLR line is not held in reset and the oscillator is
running! I would really appreciate any advice!

Thanks,
Angus Thomson


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.525 / Virus Database: 322 - Release Date: 09/10/2003

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads