I'm new to PIC programming and this is my first post to this list.

I've recently bought a "Warp-13" programmer, PicBasic Lite, and a =
TRM-425 serial LCD display.

I've stored four screens in the LCD display using the Windows "TRMCFG" =
software that came

with the display. I'm also using and programming a PIC16F84A. It seems =
to be programming ok.

The problem I'm having is as follows:

    1)    I don't know how to access the stored screens in the display's =
eeprom using the PICBasic's Serout Command.

    2)    The TRM-425 User's Manual claims that hitting the ESC key, =
followed by the Capital letter E, followed by n=20
            (the screen number that I want to display), and then the =
space bar should bring up the desired screen.

I don't know how to convert the above information to PicBasic Lite code.


If anyone has any suggestions as to where I might look for help, I would =
certainly appreciate this information.

Thanks!    =20



--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body