I have been using a macro to write and read from the eeprom since I =
first
started and have never run into any kind of problems...=20

-----Original Message-----
From: pic microcontroller discussion list =
[mailto:PICLIST@MITVMA.MIT.EDU] On
Behalf Of Gonzalo Jim=E9nez
Sent: Thursday, October 23, 2003 9:37 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: eeprom issue RESOLVED

Hello everybody,

First of all, thanks a lot for your help...

It is very very rare what happen but I just use a sub rutine enstead of =
a
macro and everything start to work OK...

I don't know why but macros drive to a strange behaviour...

So my little advice NEVER use macros to read or write EEPROM

Thanks again,

Greatings,

Gonzalo

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu