Hi,

Under Project>Build options>Project, on the Hi-Tech18 Linker tab,
although Intel HEX format is selected, sometimes on the text box under
"Inherit global settings" or "Use alternate settings", the file
extension is cof. Now I have selected "Use alternate settings" and I
have <<-O"$(TARGETBASE).hex">> written there.

Lucian
-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Ken Pergola
Sent: 19 octombrie 2003 21:07
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: PICCLite problem

Lucian wrote:

> The same thing has happened to me before. You have to look at the
> project settings, and reset the output file format to .hex. Sometimes
it
> changes back to .cof.

Hi Lucian,

Thanks for the advice -- I'll keep an eye out for things.
Do you mean on the HI-TECH LINKER tab under MPLAB's PROJECT => BUILD
OPTIONS?

The Intel Hex option button was always selected.
I only see option buttons for Intel Hex, Binary Image, and Motorola
S1/S9
Hex -- I don't see any option button for .COF that could have been
selected
by mistake.

Do you mean just selecting anything else and then selecting the Intel
Hex
option button again to reset things?

I'm sure I'm misunderstanding your advice. Could you elaborate on your
"Sometimes it changes back to .cof" statement and on resetting the
output
file?

Thanks Lucian,

Ken Pergola

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads