Maybe I am just being a spanner, but it definitely doesn't work for me.
Here's a zip of my project:-


> -----Original Message-----
> From: Jan-Erik Soderholm XA (TN/PAC)
> [mailto:jan-erik.xa.soderholm@ERICSSON.COM]
> Sent: 17 October 2003 10:14
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [PIC:] Relocatable Code / a2d problems with 16f877a
>
>
> Hulatt, Jon wrote:
> > Hi,
> >
> > I've only been doing pic development (as a hobby) for a couple of
> > months. Threads in the last couple of weeks have made me
> start looking
> > into using the linker.
>
> My current project use a 12F629, and using relocatable code
> is realy nice. No need to care about any addreses, either
> program or data, well the h'04' ISR entry point maybe...
>
> > But I'm having real difficulties.
>
> What difficulties ?
>
> I just did the following :
>
> - Created a new empty directory
> - Copied the same two files as you.
> - Fired up MPLAB (6.30)
> - Created a new project with the new directory as "working dir"
> - Entered the two files as "source" and "linker script".
> - Commented two lines and change another in the link script
>   as specified in the ASM file.
> - Selected the right device in "confiure->select device".
> - Clicked on the "make" button.
>
> And it built cleanly.
>
> But without the changes to the link script, I got the same
> error as you.
>
> Jan-Erik.
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply
> us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body