Thanks for the tips Jesse, Brian, and Lawrence. I will likely be editing
the board and adding in a plane somewhere. The device isn't switching
loads, but one of the chips on board runs at 50MHz, so I try to be as
careful as I can.

Now to find a cheap place to do the double sided through hole plating.
The university student option at Advanced (www.4pcb.com) is good at $33
a board in singles, but they quoted me $50-$75 in shipping. I emailed
back to clarify...seems awfully high for a single 2.5" by 3.5" board.

Anyone have any tricks for home made vias that are perfectly flat on at
least one side of the board? I need vias under a flat pack SMD.

ARG!

Josh
--
A common mistake that people make when trying to design something
completely foolproof is to underestimate the ingenuity of complete
fools.
        -Douglas Adams

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads