> > -----Original Message-----
> > From: pic microcontroller discussion list
> > [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of John Hansen
> > Sent: 12 October 2003 14:52
> > To: PICLIST@MITVMA.MIT.EDU
> > Subject: Re: [PIC]: PIC16F628 & ICD2 debugger?
> >
> >
> > Yes, but the 16f628a is supported by the icd2 ... And its
> cheaper too.
> >
> > John Hansen

> -----Original Message-----
> From: Peter Moreton [mailto:peter@RIL.ORG.UK]
> Sent: 13 October 2003 12:06
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [PIC]: PIC16F628 & ICD2 debugger?
>
>
> Thanks, at least I don't need to redesign the board now - just need to
> find a supply of PIC16F628A's in the UK - my usual supplier
> (RS) doesn't
> have them.
>

Be carefull, the 16F628A is supported only through the use of a special
header.  The standard 16F628A device has no onboard ICD capability.

Mike




=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to
postmaster@bookham.com.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu