Hi.
Some clarifications...

ian@CHESTPAINS.ORG wrote:
> I'm using a ceramic resonator at 20Mhz, and
> transmitting at 2400bps. (Using a wireless link that starts to crap out at
> 9600...)

I's not clear here, are you *receiving* at 9600 or 2400 baud ?
Does the "link" switch in some way to 2400 baud ?

> I've hooked it up to an oscillator to verify the TTY levels, and the
> timing.

Where ? On what pin/pins ? And when ?

> Everything seems to transmit fine, and when I rig the code to
> check RCREG manually, I do get data. So, the serial is transmitting.

Wasn't it *receiving* you had problem with ?

What's at the "other side" ? What is this PIC talking with ?

Or are you just looping Tx back to Rx using just one PIC ?

Jan-Erik.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.