I need to build several circuit boards. I have a few questions to make =
this task a little easier/faster:

Is there a good way to hold discrete components/jumpers in place while =
soldering, so that they won't be impossible to remove if needed?

How can I keep the insulation on jumper wires that touch or cross over =
each other from melting.

Making a few solder bridges across .1" spaced pads would make things a =
little easier. Any tricks to making good solder bridges on the first =
attempt?

Any other tips/tricks are welcome

Thanks

John

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics