Actually I am using 16LF628.  I didn't want to use another chip as I am very
comfortable with the 628.  However, It might make sense to look at those as
well.

Thanks for the tip.

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Ken Pergola
Sent: Saturday, October 04, 2003 1:27 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [EE:] Dropping the battery voltage


Vmer Yalh} wrote:

> I am at 24uA currently during sleep, and hope to go even lower.

Hi Vmer,

Are you using a nanoWatt technology PICmicro?
If not, it would greatly help your cause in getting the sleep current down
as low as possible.

Best regards,

Ken Pergola

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu