Standard IDC .1" headers might work well. You might recognize them from
their use in most hard drive cables. In fact, if you have spare
boardspace and don't mind unused pins, you can use standard hard drive
cables. They are cheap and easy to find.

Josh
--
A common mistake that people make when trying to design something
completely foolproof is to underestimate the ingenuity of complete
fools.
        -Douglas Adams

German Spagnoli wrote:
> I need any advise about connectors to interconnect PCB into a a cabinet
> .(10cm "cable" max. and I= 10mA max. low frequency)
> I have to pass 22 lines + Power supply.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads