Thank you, but I didn't use sleep...
And the T1sync bit HAS influence!!
I've tested it twice.
If zero, the timer did not run.
Jo

----- Original Message -----
From: "Colombain Nicolas" <colombain.nicolas@WANADOO.FR>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Sunday, September 28, 2003 2:27 PM
Subject: Re: [PIC:] timer1 on 16F628


> Hi Jo,
>
> The T1Sync bit has no influence when using the internal clock as long as
you
> are not in sleep mode .....
> If T1Sync is set to 0 and the PIC is in sleep, the timer 1 will never
> increment..
> Nicolas
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu