At 04:29 PM 9/10/2003 +0100, you wrote:


>Clearly, this problem stems from me not knowing how to use eagle very well.
>What am I actually *supposed* to do to my schematic to link all these things
>together, without having to directly link them in the schematic (because
>that would look messy and be harder to read)??

Don't know Eagle specifically, but this type of problem is typically
caused by having two different names for what is supposed to be the same net,
such as GND and Vss. Especially if each resulting net has more than one node,
there's no way for the program to detect a problem and emit a warning.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics