Piclisters who own / use a WARP-13 programmer are advised that there is a
"mandatory**" firmware update for the 18F1220 and 18F1320.

This firmware is available free of charge on my web site. There are versions
for the 16F876 and a version for the 18F252 bootloader enabled firmware.
Both versions require a 20MHz WARP-13 so you may need to do the
20MHz conversion as detailed on the web site.

This firmware update was created after NEWFOUND ELECTRONICS
received a sample from a WARP-13 user. This sample was from a previously
untested batch and it would not erase correctly with the existing firmware.

Happily, the problem was solved and the new firmware issued immediately.

Regards,

Jim Robertson
NEWFOUND ELECTRONICS


** Mandatory means don't bother asking for tech assistance with any
problems with the 18F1220 and 18F1320 until you have the likely fix-up
installed. You are not being "forced" at gun point to do it. ;-)



______________________________
MPLAB compatible PIC programmers.
NEWFOUND ELECTRONICS P/L
http://www.newfoundelectronics.com
______________________________

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads