> -----Original Message-----
> From: Olin Lathrop [SMTP:olin_piclist@EMBEDINC.COM]
> Sent: Wednesday, September 03, 2003 1:00 PM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      Re: [PIC:] How to monitor a dozen shafts?
>
> Pretty much everything is easier in assembly on a PIC than in C, once you
> are familiar with the assembler and have gotten good at it.  The many so
> called advantages of higher level languages don't hold water on small
> resource limited systems where you are always close to the hardware, in my
> opinion.
>
You keep saying this, so I can only assume you have never used a *decent* C
compiler for the PIC architecture, or if you have you didn't use it
properly.

Mike




=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to
postmaster@bookham.com.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu