Restored TAG removed by "gtyler".  Why do people muck with the Subject line
when doing a Reply?!
Jim
----- Original Message -----
From: "Denny Esterline" <firmware@TDS.NET>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, September 01, 2003 11:47 AM
Subject: Re: High Voltage H-bridge design


> Variable frequency, range ofanout  20Hz to 200Hz.
>
> -Denny
>
> ----- Original Message -----
> From: "gtyler" <gtyler@DRUMMOND.ORG.ZA>
> To: <PICLIST@MITVMA.MIT.EDU>
> Sent: Monday, September 01, 2003 1:17 AM
> Subject: Re: High Voltage H-bridge design
>
>
> > What frequency ? Ir make Driver chips for this but if is slow other
ideas
> > might be better.
> >
> > George
> >
> > ----- Original Message -----
> > From: "Denny Esterline" <firmware@TDS.NET>
> > To: <PICLIST@MITVMA.MIT.EDU>
> > Sent: Monday, September 01, 2003 6:37 AM
> > Subject: [EE]: High Voltage H-bridge design
> >
> >
> > > Does anybody have any good information about high voltage H-bridges?
> > (about
> > > 200V @ 4A)
> > >
> > > I was thinking about IGBT but I'm a little fuzzy about how to drive
the
> > high
> > > side of the bridge.
> > >
> > > Thanks
> > > -Denny
> > >
> > > --
> > > http://www.piclist.com hint: The PICList is archived three different
> > > ways.  See http://www.piclist.com/#archives for details.
> > >
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three different
> > ways.  See http://www.piclist.com/#archives for details.
> >
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.