Drive it with MOSFETS switched on/off with opto-isolators. They switch
sorta slow, but will work fine for this. Use H11F1, its an internal FET,
can handle the HV.

--Bob

At 12:37 AM 9/1/2003 -0400, you wrote:
>Does anybody have any good information about high voltage H-bridges? (about
>200V @ 4A)
>
>I was thinking about IGBT but I'm a little fuzzy about how to drive the high
>side of the bridge.
>
>Thanks
>-Denny
>
>--
>http://www.piclist.com hint: The PICList is archived three different
>ways.  See http://www.piclist.com/#archives for details.

--------------
Bob Axtell
PIC Hardware & Firmware Dev
Tucson, AZ
1-512-219-2363

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.