TAG addition. ----- Original Message ----- From: "Scott Dattalo" To: Sent: Saturday, August 30, 2003 4:21 PM Subject: Sleep for the 12c5xx > You can put a 12c5xx part to sleep by executing the SLEEP instruction. > Then you can wake it up by toggling an I/O line. However, the data sheet > implies (but doesn't explicitly state) that the processor resumes > execution as though if a RESET occurred. Does anyone know for sure if this > is the case? BTW, this is different than the midrange and 18f series. > Those devices resume execution at the instruction immediately following > the SLEEP instruction. > > Scott > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads