Hi Wouter,

Thanks for the info. It looks like an interesting product. I will take a
closer look at the information on your site.

I have few question if you don't mind.

1. Do you have a good picture of the Wisp628 kit fully assemble ? I
looked at your site but could not find any (there is a picture with two
boards and it is not clear which one is the programmer).

2. Do you have screen shoots of the Xwisp (before I go to the trouble of
installing Python and Xwisp).

Also, does it comes in kit form including all the components,
connectors, PCB, etc ?

Thanks,

Tal

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Wouter van Ooijen
> Sent: Saturday, August 30, 2003 12:01 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [PIC]: Anybody using a USB programmer ?
>
>
> > I am looking for a PIC programmer that is *specified* to
> work over USB
> > (I had trouble using serial programmers using USB/Serial adapter).
>
> I have no trouble specifying that Wisp628 works over a
> standard USB-serial adapter. But it is *not* an ex-circuit
> programmer (no zif socket).
>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads