> You are right! After this I checked, and what is actually happening is
> that when I put the scope probe on the xtal the osc stops.

That's pretty normal when putting a 1Mohm scope probe on the oscillator in
pin.  You have to use the scope probe in x10 mode (10Mohm) to see the
osciallator signals correctly.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body