Sorry about the tag OE and all.... ----- Original Message ----- From: "Denny Esterline" To: Sent: Sunday, August 24, 2003 8:46 PM Subject: Re: Source for 8 pin PLCC socket > Never seen any myself. My fist experiment with the ADXL202, I soldered on > some small (24ga) leads about an inch long, and bent them to plug into a > breadboard. Later I etched a board about 1 inch sq with some pins on it. > > IIRC, sombody makes an adaptor board for these. If you're interested I can > look through my bookmarks and find it. > > > Good Luck > Denny > ----- Original Message ----- > From: "Liam O'Hagan" > To: > Sent: Sunday, August 24, 2003 8:23 PM > Subject: [EE]: Source for 8 pin PLCC socket > > > > Just got my sticky paws on a few ADXL202 accelerometers, but they come in > an > > 8 pin PLCC format. > > > > Before I go attempting to solder anything to these chips manually, does > > anyone know of a source for 8 pin PLCC sockets? > > > > They're as rare as rocking horse excrement as far as I can tell... :( > > > > -- > > http://www.piclist.com hint: To leave the PICList > > mailto:piclist-unsubscribe-request@mitvma.mit.edu > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu > -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu