And if I need to go USB, one of those chips will do the trick nicely =
(forgot
the number, WvO sells them).

Wouter- any plans to add USB to Wisp628 in the future?=20

-----Original Message-----
From: Wouter van Ooijen [mailto:wouter@VOTI.NL]
Sent: 22 August 2003 13:11
To: PICLIST@MITVMA.MIT.EDU
Subject: RE: [PIC:] Which programmer for =A350


>  >I have used and would highly recommend the Wisp628
>
> If you are looking to the future then you should buy a
> Programmer with a USB connection.

The OP has already bought a Wisp628 kit :)

I agree that USB is probably the future, but the price of USB-to-serial
converters getting lower all the time so an RS-232- only programmer is
sufficiently 'future-proof' for the forseable future.

When doing ex-circuit programming USB can have the advantage that no
external power is needed, but for ICSP the USB power is probably no
adequate, so this disadvantage disappears.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.