Your drawing by hand?

Try this: Eagle cad (free version, limited board size to about 3.5 x 4
inches, 2 layers max)
www.cadsoft.de

(Computer software to design boards - $0)


And use this to produce the boards
www.fullnet.com/u/tomg/gooteepc.htm

(Printing the etch resist on your laser printer - $0)

(Not having to draw PCBs anymore - priceless)

I used it just a couple days ago to create an RS232 adaptor board to plug
into my breadboard. Traces 10 thou wide and surface mount resistors to 805
size!

Good Luck
-Denny

----- Original Message -----
From: "Jinx" <joecolquitt@CLEAR.NET.NZ>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Thursday, August 21, 2003 11:50 PM
Subject: Re: [EE]: Etch resist pen tips


> > The Sharpie lasts much much longer than any resist pen
>
> Okey doke, I'll give it a go. An SMT datalogger to draw up
> tomorrow, be a good test. Let you know how it goes
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.