i would not like to see the screen of the remote machine. i would only like to use only it's serial port and run the application on the local machine, as this one is much more powerful. tino Charles Craft Gesendet von: pic microcontroller discussion list 21.08.2003 09:12 Bitte antworten an pic microcontroller discussion list An: PICLIST@MITVMA.MIT.EDU Kopie: Thema: [PIC:] Re: ICD1 connected to Remote PC ? http://www.uk.research.att.com/vnc/ Client/server remote desktop supported on many platforms. -------Original Message------- From: Martin.Buehler@KEYMILE.COM Sent: 08/21/03 12:47 AM To: PICLIST@MITVMA.MIT.EDU Subject: ICD1 connected to Remote PC ? > > I would like to debug a target in a remote location, using ICD1. To avoid long, temporary rs232 cables through the building, i would like to use the existing ethernet instead in the following way: [myPC] ------ethernet connection-------- [remoteNotebook with shared serial port] --------rs232 cable--------- [ICD1] Then i would like to control the ICD1 from myPC. Is this possible? Has anyone experience (good or bad) with such a situation? Thanx! tino -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics > -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics