http://www.hammondmfg.com/scpg.htm

You can use a standard enclosure than have an engineering company in =
your vacinity=20
cut out the holes for you.=20
A lexan label from a screen printer then provides a tidy finish.

Kind Regards

David Huisman


-----Original Message-----
From: Jeff Vogt [mailto:piclist@JDCCS.COM]
Sent: Tuesday, 19 August 2003 4:12 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: [EE]: Source for custom plastic enclosures and PCB
manufacturing


I am at the point where for the first time I might have a buyer for a =
circuit I have been working on involving a pic.  Never done this before =
so I don't know where to look or what to look for.  Approximate number =
of finished products will be around 1000-4000.  I can do the board =
design but I have no clue what to do for an enclosure or pcb =
manufacturing.

Anybody know where I might be able to find a (possibly) pre made small =
(4"x2"x1" approx) enclosure that has a portion cut out for a 1-2" =
speaker, AC Adaptor hole, and DB-9?  I would imagine chances are pretty =
slim to find that exact box so -- Anybody know who might do it custom =
for me and maybe an average price?

I would also need the boards made and possibly finished with components =
(unless I decided to do it myself.  Anybody here ever take on 1000-4000 =
pcbs by themselves or with a couple friends?  Comments on this are =
welcome ;) )  Also looking for average prices on that as well.  They =
will only have around 50 or so actual solder points.

Thanks in advance,


-- Jeff

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu