Yep, That did the trick.  I know there was something different you had to
do, just couldn't remember it.  It's been a couple of years since I've done
this kinda stuff.

Thanks,
Duane

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Sean Alcorn - PIC Stuff
Sent: Thursday, August 14, 2003 9:05 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: Eagle - Copying gates


On Thursday, Aug 14, 2003, at 23:46 Australia/Sydney, Nick Veys wrote:

> Select what you want, then hit "Cut".  Then "Paste".  It's
> counter-intuitive, it copies instead of cuts.  I do not know what the
> "Copy" button is for.  But hey, it's foreign and Linux-native, so you
> can't blame them really. :)

I've been using EAGLE long before they went to Linux, and it has always
been this way - I have no idea why. I am sorry I did not see this post
sooner. Hope Nick's answer was some help.

Regards,

Sean

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu