Likewise my dontronics dt006 works perfectly with the parallel port and
windows XP...

> -----Original Message-----
> From: Sten Dahlgren [SMTP:stda@ENEA.SE]
> Sent: Wednesday, August 13, 2003 9:10 PM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      Re: [AVR]: AVRISP & Windows XP?
>
> David VanHorn wrote:
>
> > At 03:42 PM 8/12/2003 -0300, Marcelo Puhl wrote:
> >
> >
> >>       My friend is using the Atmel AVR ISP software. The programmer is
> >>connected to the PC paralel port and has a 74HC244 driving the AVR.
> >>       This setup work 100% on W98 but just 10% on XP :(
> >>
> >>       I'll recommend he install AVR Studio.
> >>
> >
> > I don't know if Studio can drive that hardware.
> > the AVRISP runs through the serial port.
> >
> > XP usually prevents you from accessing the parallel port directly.
> >
>
> I'm useing the WinAVR collection with gcc and avrdude as the programmer
> and it is working with my stk200 dongle in XP without any problems at all.
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body