Not done yet, stay in touch. --Bob At 01:03 PM 8/12/2003 -0700, you wrote: >I've developed a product based upon the PIC 18F8720 chip with the >Microchip ICD which is now out in the field (about 3 hours away by >car). My main board has the RJ plug mounted just like the PICDEM2 >board, which worked great in the lab. > >I'd like to be able to provide updates to the customer without having to >travel there in person. > >Is there a handheld programmer for the P18 series controller which will >plug into the ICSP/debug and reprogram the device? This would be great, >as I could "charge" the programmer at home and ship it to customers by >UPS..... > >Thanks for any help..... > >DD >-- >Dan Devine >New World Industries > >-- >http://www.piclist.com hint: The PICList is archived three different >ways. See http://www.piclist.com/#archives for details. -------------- Bob Axtell PIC Hardware & Firmware Dev Tucson, AZ 1-512-219-2363 -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.