My friend is using the Atmel AVR ISP software. The programmer is
connected to the PC paralel port and has a 74HC244 driving the AVR.
        This setup work 100% on W98 but just 10% on XP :(

        I'll recommend he install AVR Studio.

        Thanks.
        Mark


On 12 Aug 2003 at 12:55, David VanHorn wrote:

> At 02:51 PM 8/12/2003 -0300, Marcelo Puhl wrote:
>
> >        Hi,
> >        Is there a way to make AVRISP work on Windows XP with
> >a Kanda programmer?  A friend of mine are trying that but
> >it only works one of ten times...
>
> You mean you're trying to drive an AVRISP programmer with Kanda software?
>
> Why not use studio 3.x or 4.x? They work just fine.
> Set the clock rate down a bit for reliability.
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.