Thank you very much! :)

Sabachka

On Sun, Aug 10, 2003 at 09:08:29PM -0500, Mike Hord wrote:
> Sure, let me just look it up...
>
> <shuffle, shuffle, shuffle>
>
> Here it is!  It's TI part number UCC2941D, Digikey part 296-12143-5-ND.
> $2.97US in single unit, $1.683US in 1000 unit.  SOIC-8 (either good or
> bad, depending on your view point) and requires a 22 uH inductor.
> 200 mA/500mW/3.3 V output, although if you look at the datasheet,
> you'll see other voltage options.  The input can range from .8-3.8V, and
> the output won't change.
>
> I'm using this one because it's small and cheap.  If you look at some of
> Linear's regulators, you can find some that will do a similar job, and have
> a battery low indicator.  That part number I don't have.
>
> Mike H.
>
> >I don't suppose you could also pass along the part number and source for
> >the step up regulator you are talking about?

--
sabachka-micro@oddmagic.net

veni vidi nuclei deceiri - I came, I saw, I dumped core

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads