Hi G Tyler, I just tried the link and it works -- did you make sure the URL ends in '.pdf' ? Good luck, Ken Pergola -----Original Message----- From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of gtyler Sent: Monday, August 04, 2003 3:59 PM To: PICLIST@MITVMA.MIT.EDU Subject: Re: [PIC]: You gotta be kidding me (PIC18FXX20 Rev A3) Hi you guys, I have been watching this link with interest as I am currently designing a couple of projects with 18F1220's running at 40Mhz. That link (80129F.pd) has been removed from Microchip's web site, even if you do a search it cannot be found. If somebody has it please email it to me at gtyler@drummond .org.za ----- Original Message ----- From: "Tal" To: Sent: Monday, August 04, 2003 5:38 PM Subject: Re: [PIC]: You gotta be kidding me (PIC18FXX20 Rev A3) > It is only a corruption of "a few bits". Not a big deal. > > ;-) > > Tal > > > -----Original Message----- > > From: pic microcontroller discussion list > > [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Bob Ammerman > > Sent: Sunday, August 03, 2003 5:26 AM > > To: PICLIST@MITVMA.MIT.EDU > > Subject: [PIC]: You gotta be kidding me (PIC18FXX20 Rev A3) > > > > > > Received from mChip: > > > > Microchip has released a new Errata sheet for the PIC18FXX20 > > Rev. A3 Silicon/Data Sheet Errata family of devices. If you > > are currently using one of these devices please read the > > document located at > > http://www.microchip.com/download/lit/suppdoc/errata/80129F.pd > f. > > 4MHz of less operating speed is ok > > Anything over 4 can break. > > Yech. > > What a bogus thing. > > Bob Ammerman > RAm Systems > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! email > listserv@mitvma.mit.edu with SET PICList DIGEST in the body > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu > -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads