Hi Jan-Erik,

Maybe I have something good for your peace of mind...

Jan-Erik S=F6derholm XA (TN/PAC) wrote:

> I just downloaded the latest b452-1.hex from Wouters
> "Blink-a-LED" page, and I get the same result.
> The 1320 programs "OK,fail,OK,fail,OK,fail..." *if*
> I power of between each run.

As a test I repeatedly programmed my F1320 and guess what: it
fails *sometimes* (approx. 1 in 5 times), and in that case also with
verify at address 0. I did not power-off/on between runs, and used=20
Wisp628 with firmware 1.09 with my own XWisp2.

Then I tried an 18F2320, which is the closest I have to the 18F1320 (I=20
think), and had not a single failure!

So the F1320 seems to be somewhat 'special'!

BTW My 18F1330 is rev. 02, my 18F2330 is rev. 03....

Regards, Rob.


--=20
Rob Hamerling, Vianen, NL phone +31-347-322822
homepage: http://www.robh.nl/

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu