You might want to ask this over at the official Altium maillist at their
website.

From reading the messages on the DXP list I think you need to change your
query terms from IsPolygon to InPolygon. I don't use DXP yet but, as I
understand it, IsPolygon gets you only the outline and InPolygon gets the
tracks that make up (are in) the polygon.

Paul

>-----Original Message-----
>[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Mauricio Jancic
>Sent: Monday, July 28, 2003 6:22 PM
>
>Hi, this one is to the Protel DXP users:
>
>            I've made a board and now need to draw a polygon plane on
>both layers. The problem is that a I have a Clearance constrait rule,
>set to 10mils, and want to make it 25mils ONLY for polygons. So, I
>create 2 rules:
>
>Rule 1: (priority 1)
>First Object         : isPolygon
>Second Object     : Not isPolygon
>Gap                    : 25mils
>
>Rule 2: (priority 2)
>First Object         : Not isPolygon
>Second Object     : Not isPolygon
>Gap                    : 10mils
>
>Draw the polygon but it obeid to the 2nd rule... How do you do this?
>
>thanks
>Mauricio

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body