Trash the pot and use two push buttons, "up" and "down"...
No ADC and no flickering between values.

Jan-Erik.

PS.
Make sure your lines are limited to a reasonable/readable/editable length.
If your mail tool can't make that for you, use your ENTER key !
DS.



rrc124+@PITT.EDU wrote:

> Here's the setup: PIC16F872's ADC pin, PORTA pin 0, connected to a 1 Meg Ohm pot.
> Four LEDs provide output.
>
> Here's the requirement: use the pot to select one of 16 values, 0 to 15 with the
> output being the 4 leds...a 4 digit binary number.

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics