Update to MPLAB 6.3.  It worked fine in 5.x so I would guess the part was
not supported in 6.2 due to the rollout process used in the update to 6.x.
You can also use the latest 5.x I think 5.7 that is on the web site for
programming if needed. The Picstart Plus has supported the 505 for a long
time now.

At 08:31 AM 6/19/03 +0500, you wrote:
>  Ted,
>
>  Buy a new 17C44 and program the latest firmware from the Microchip website
>  into it.   This will give you support for all the latest uC's that the
>  PicStart supports as of this time.
>
>                                                    Regards,
>
>                                                      Jim
>
>
>
> > I wanted to program a PIC16C505 with my PICStart Plus....and it doesn't
> > show up on the list in MPLAB 6.2....any ideas how I can program one of
> > these with a PICStart Plus?
> >
> > Any help would be mucho appreciated.
> >
> > Thanks,
> >
> > - Ted
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three different
> > ways.  See http://www.piclist.com/#archives for details.
>
>--
>http://www.piclist.com#nomail Going offline? Don't AutoReply us!
>email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

Larry G. Nelson Sr.
mailto:L.Nelson@ieee.org
http://www.mchipguru.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu