Is anybody certain that the HC latch will work at that speed? I've had to go
to F parts to reach those speeds.

--Bob

At 01:24 PM 7/25/2003 +1200, you wrote:
> > LE is active high, Joe.  From the Fairchild Semi. data sheet for
> > the 74HC573:
> >
> > "When the LATCH ENABLE(LE) input is HIGH, the Q outputs will
> > follow the D inputs. When the LATCH ENABLE goes LOW, data
> > at the D inputs will be retained at the outputs until LATCH ENABLE
> > returns HIGH again."
> >
> > Cheers...
> >
> > Dave D.
>
>The Texas d/s I have says this about LE
>
>"The outputs are transparent to the inputs when LE is high", which
>doesn't explain it nearly as well as Fairchild's but that's no excuse
>
>I was away from school the day they did "see through - can't see
>through". Jeez, what a chump. Isn't it awful when you start off with
>a mis-read and you don't look back ?
>
>Thanks
>
>--
>http://www.piclist.com#nomail Going offline? Don't AutoReply us!
>email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

---------------
NOTICE

1. This account can accept email & attachments up to 10M in size.
2. Federal Monitors: At request of client, some attachments are encrypted.
Please DO NOT delay traffic; please reply with credentials for password.
--------------

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu