Here=27s a loose translation for you=3A
Pay attention to the following when assembling CC1000PP=2C v3=2E1

The components P1=2C and P2 should be mounted on the back of the board (t=
he side with the solder joints)!
Also note that L101 should be mounted with the white stripe pointing towa=
rds the crystal=2E

Reference points for pick-and-place=3A
Top left GND pin coordinate (2540=2C 3780)
Lower right pin coordinate (3040=2C 2780)

/Patrik


----- Original Message -----
From=3A =D6mer Yalh=3F =3Coyalhi=40TEKSAN=2ECOM=2ETR=3E
Date=3A Thursday=2C July 24=2C 2003 1=3A47 pm
Subject=3A =5BOT=5D=3A Norwegian

=3E Can anyone translate the below writings I think they are in Norwegian=
=3F
=3E =

=3E V=E6r oppmerksom p=E5 f=F8lgende ved montasje CC1000PP=2C v=2E3=2E1
=3E =

=3E Komponentene P1 og P2 skal monteres fra undersiden (loddesiden) av =

=3E kortet!Merk ogs=E5 at L101 skal monteres med hvit stripe pekende mot =

=3E krystallet=2EReferansepunkter for pick-and-place
=3E =D8verste venstre pinne for GND Koordinat (2540=2C3780)
=3E Nederste h=F8yre pinne Koordinat (3040=2C2780)
=3E =

=3E =

=3E I appriciate it
=3E =

=3E Omer
=3E =

=3E --
=3E http=3A//www=2Epiclist=2Ecom=23nomail Going offline=3F Don=27t AutoRe=
ply us!
=3E email listserv=40mitvma=2Emit=2Eedu with SET PICList DIGEST in the bo=
dy
=3E

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body